[1]. Evaluation of Tribological Characteristics of Environmentally Friendly Lubricants and Chemical Conversion Coatings during Cold Forging of Duplex Stainless Steel
Journal of the Japan Society for Technology of Plasticity / - (2024) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 山下 優樹, 久保田 義弘, 早川 邦夫 [DOI]
[2]. International round robin test of environmentally benign lubricants for cold forging
CIRP Annals 72/1 245-250 (2023) [Refereed] refereed [Internationally co-authored papers] internationally co-authored paper
[Lead author or co-author] co-author
[Author] S.Volz, J.Launhardt, N.Bay, C.Hu, P.Moreau, L.Dubar, C.Nielsen, K.Hayakawa, K.Kitamura, P.Groche [Notes] 担当分の実験および結果の提示，文章チェック．
[DOI]
[3]. Polarity switching via defect engineering in Cu doped SnSe0.75S0.25 solid solution for mid-temperature thermoelectric applications
Materials Research Express 10/5 - 056507 (2023) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] S Athithya and K P Mohamed Jibri and S Harish and K Hayakawa and Y Kubota and H Ikeda and Y Hayakawa and Y Inatomi and M Navaneethan and J Archana [DOI]
[4]. Probing an enhanced anisotropy Seebeck coefficient and low thermal conductivity in polycrystalline Al doped SnSe nanostructure
AIP Advances 13/1 - 015311 (2022) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] Athithya,S. and Jibri,K. P. Mohamed and Harish,S. and Hayakawa,K. and Kubota,Y. and Ikeda,H. and Hayakawa,Y. and Navaneethan,M. and Archana,J. [Notes] K. Hayakawa: Formal analysis (equal).
[DOI]
[5]. Effect of Powder Mold Release Agent on Aluminum Alloy Melt Under Gravity Casting Conditions
International Journal of Automation Technology 16/6 888-896 (2022) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] Kuiyuan Mu, Makoto Nikawa, Kunio Hayakawa, Hidetaka Shima, Minoru Yamashita [DOI]
[6]. An Anisotropic Damage Model for Prediction of Ductile Fracture during Cold-Forging
metals 12/11 - 1823 (2022) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Atsuo Watanabe, Kunio Hayakawa, Shinichiro Fujikawa [DOI]
[7]. Evaluation of Tribological Characteristics of Titanium Alloy by Cold and Warm Forward Rod-Backward Can Combined Extrusion Test
Journal of the Japan Society for Technology of Plasticity 63/742 145-150 (2022) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 西 源貴, 久保田 義弘, 早川 邦夫 , 中村 保 [DOI]
[8]. Adjustment of crystal orientations and application to crystal plasticity simulation of cup drawing
International Journal of Material Forming 15/ 1-15 68 (2022) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] Kengo Yoshida, Tomohisa Honke, Yasuhito Yamazaki, Kunio Hayakawa, Hidetaka Nakanishi [DOI]
[9]. The effect of Sr and Sb co-doping on structural, morphological and thermoelectric properties of BaSnO3 perovskite material
Journal of Alloys and Compounds 894/ - 162335 (2022) [Refereed] refereed [Internationally co-authored papers] internationally co-authored paper
[Lead author or co-author] co-author
[Author] P. Rajasekaran, M. Arivanandhan, N. Sato, Y. Kumaki, T. Mori, Y. Hayakawa, K. Hayakawa, Y. Kubota, R. Jayavel, M. Shimomura [DOI]
[10]. Influence of Tool Pin Profiles in Friction Stir Welding of Aluminum Alloy and Polycarbonate
Defect and Diffusion Forum 414/ 185-190 (2022) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Arunagiri Azhagar, Kunio Hayakawa, Hiroo Shizuka, Katsuhiko Sakai [DOI]
[11]. Temperature Dependency of Friction of Titanium Alloy by Forward Rod-Backward Can Combined Extrusion Test
Defect and Diffusion Forum 414/ 163-168 (2022) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Genki NISHI, Yoshihiro KUBOTA, Kunio HAYAKAWA and Tamotsu NAKAMURA [DOI]
[12]. Experimental investigation of the effects of super-elasticity on the machinability of NiTi alloys
International Journal of Advanced Manufacturing Technology 115/ 581-593 (2021) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] Yang H, Sakai K, Shizuka H, Kurebayashi Y, Hayakawa K, Nagare T [DOI]
[13]. Application of Anisotropic Ductile Fracture Model for Prediction of Diagonal Cracks in Outer Rim of Flange-Shaped Parts
Journal of the JSTP 62/722 31-36 (2021) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 渡邊敦夫，早川邦夫，藤川真一郎，竹下達視，古谷美佳 [DOI]
[14]. Effect of cutting speed on shape recovery of work material in cutting process of super-elastic NiTi alloy
International Journal of Automation Technology 15/1 24-33 (2021) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] Yang H, Sakai K, Shizuka H, Kurebayashi Y, Hayakawa K, Nagare T [DOI]
[15]. Difficult Cutting Property of NiTi Alloy and Its Mechanism
J. Manuf. Mater. Process 4/4 124-138 (2020) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] Hiroo Shizuka, Katsuhiko Sakai , Hao Yang, Kazuki Sonoda , Tetsuo Nagare , Yuji Kurebayashi and Kunio Hayakawa [DOI]
[16]. Effect of densification technique and carrier concentration on the thermoelectric properties of n-type Cu1.45Ni1.45Te2 ternary compound
CrystEngComm 22/ 8100-8109 (2020) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] Kavirajan, S., Archana, J., Harish, S., Navaneethan, M., Ponnusamy, S., Hayakawa, K., Kubota, Y., Shimomura, M., Hayakawa, Y [DOI]
[17]. Milling of sintered carbide using electrochemical reaction － Measurement of cutting force and investigation of machining phenomena
Journal of The Japan Society of Electrical Machining Engineers 54/135 22-30 (2020) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] 王思聰，後藤昭弘，中田篤史，白井康介，脇川祐介， 坂部晃紀， 陳俊達， 早川邦夫 [DOI]
[18]. Study on the prevention of hexavalent chromium formation by iron ion added electrolyte in ECM of c hromium containing steel
Journal of The Japan Society of Electrical Machining Engineers 54/135 2-9 (2020) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] 王思聰，後藤昭弘，小土橋陽平， 中田篤史， 陳俊達，陳彦東，早川邦夫 [Notes] 2021年度論文賞受賞（電気加工学会）
[DOI]
[19]. Electromagnetic shielding property of laminated carbon fiber tape reinforced thermoplastics
Polymer-Plastics Technology and Materials 59/12 1308-1316 (2020) [Refereed] refereed [Internationally co-authored papers] internationally co-authored paper
[Lead author or co-author] co-author
[Author] Asep Bustanil Aripin, Takashi Yamamoto, Makoto Nishi & Kunio Hayakawa [DOI]
[20]. Experimental and Numerical Investigation of Residual Stresses in Incremental Forming
MATERIALS TRANSACTIONS 61/2 228-233 (2020) [Refereed] refereed [Internationally co-authored papers] internationally co-authored paper
[Lead author or co-author] co-author
[Author] Adabala Subrahmanyam, Rakesh Lingam, Kunio Hayakawa, Shigekazu Tanaka, N. Venkata Reddy [DOI]
[21]. Evaluation of the Mechanical and Electromagnetic Shielding Properties of Carbon Fiber Reinforced Thermoplastics Sheet Made of Unidirectional Tape
MATERIALS TRANSACTIONS 61/2 251-255 (2020) [Refereed] refereed [Internationally co-authored papers] internationally co-authored paper
[Lead author or co-author] author
[Author] Asep Bustanil Aripin, Makoto Nishi, Kosei Suzuki, Kunio Hayakawa [DOI]
[22]. Effects of Tool Surface Geometry on Temperature Distribution and Material Properties of an Aluminum Alloy in Friction Stir Welding
MATERIALS TRANSACTIONS 61/2 276-281 (2020) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Arunagiri Azhagar, Kunio Hayakawa [DOI]
[23]. Effect of Production Rate on Lubrication Performance of Environmentally-Friendly Lubricant in Combined Forward-Can and Backward-Can Cold Extrusion Test of Aluminum Alloy
MATERIALS TRANSACTIONS 61/2 289-294 (2020) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Ippei Takahashi, Kunio Hayakawa, Yoshihiro Kubota, Itaru Ishibashi, Tamotsu Nakamura [DOI]
[24]. Evaluation of strength of stainless steel bolt without heat treatment considering Bauschinger effect during manufacturing process
Journal of Materials Processing Technology 278/ - 116481 (2020) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] S. Narita, K. Hayakawa, T. Uemori, Y. Kubota [DOI]
[25]. Prediction Method of Ductile Fracture in Cold Forging Using Anisotropic Ductile Fracture Criterion
Journal of the JSTP 60/703 221-227 (2019) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 渡邊敦夫，早川邦夫，藤川真一郎，志賀則幸 [Notes] 論文賞受賞
[DOI]
[26]. Finite Element Analysis of Hot Rolling Wear Test
Tetsu-to-Hagané 104/12 728-734 (2018) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川邦夫 [DOI]
[27]. Numerical analysis on effect of surface asperity of piston skirt on lubrication performance
Procedia Manufacturing 15/ 496-503 (2018) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Hideaki Aoki, Kunio Hayakawa, Naoyuki Suda [URL] [DOI]
[28]. Evaluation of mechanical properties of randomly compression molded carbon fiber reinforced thermoplastic sheet made of unidirectional tape,
Procedia Manufacturing 15/ 1708-1715 (2018) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Takashi Yamamoto, Kunio Hayakawa [URL] [DOI]
[29]. Cyclic simple shear test of material for cold forging
Procedia Manufacturing 15/ 1785-1791 (2018) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Tatsuya Fujii, Kunio Hayakawa, Takafumi Harada, Shinobu Narita [URL] [DOI]
[30]. Friction coefficients in cold forging: A global perspective
CIRP Annals 67/1 261- 264 (2018) [Refereed] refereed [Internationally co-authored papers] internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]P. Groche, P. Kramer, N. Bay, P. Christiansen, L. Dubar, K. Hayakawa, C. Hu, K. Kitamura, P. Moreau [DOI]
[31]. Effect of Workpiece Surface Topography on Friction in Cold Forging Using Environmentally-Friendly Lubricant
Key Engineering Materials 767/ 157-162 (2018) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]K. Hayakawa [共著者]T. Nakamura [DOI]
[32]. A Joining Method of Shaft and Holed Part Using Plastic Deformation
Procedia Engineering 207/ 944-949 (2017) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]Hayakawa, K. [共著者]Yoshida, H.,Nakamura, T. [DOI]
[33]. Effect of Hardening Rule for Spring Back Behavior of Forging
Procedia Engineering 207/ 167-172 (2017) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]Hayakawa, K. [共著者]Narita, S.,Harada, T.,Kubota, Y.,Uemori, T. [DOI]
[34]. Efforts of Creating Regional Cooperation Innovations at Shizuoka University
Journal of the Japan Society for Technology of Plasticity 58/682 985-989 (2017) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]鈴木 正人,岡島 いづみ,佐古 猛 [Notes] 3章担当
[DOI]
[35].
32/11 032-035 (2017) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川 邦夫
[36].
(vol)/(num) (xxx) - (zzz) (2016) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川 邦夫
[37]. Effect of Hardening Rule on Analysis of Forming and Strength of Multistage Cold Forged Bolt without Heat Treatment
Journal of the Japan Society for Technology of Plasticity 57/670 1074-1080 (2016) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]成田 忍,上森 武,久保田 義弘 [DOI]
[38]. Evaluation of Environmentally Friendly Lubricant for Aluminum Alloy Cold Forging
Journal of the Japan Society for Technology of Plasticity 57/664 473-478 (2016) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]鷺坂芳弘 [共著者]石橋格,中倉敏成,中村保,早川邦夫 [DOI]
[39].
Journal of the Japan Society for Technology of Plasticity 57/661 90-94 (2016) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川 邦夫 [DOI]
[40].
Journal of the Japan Society for Technology of Plasticity 56/658 938-939 (2015) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]北村 憲彦 [DOI]
[41].
30/5 28-31 (2015) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川 邦夫
[42]. Electro-thermo-mechanical finite element analysis on DC pulse resistance pressure sintering process of zirconia part
Procedia Engineering 81/(num) 2421-2426 (2014) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]Kunio Hayakawa [共著者]Yoshihiro Kubota,Takumi Okano,Shigekazu Tanaka,Tamotsu Nakamura [DOI]
[43]. Influence of flow stress on lubricating abilty of environmentally-friendly lubricant for aluminum alloy cold forging
Advanced Materials Research 966-967/(num) 301-310 (2014) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]K. Hayakawa,Y. Sagisaka [共著者]T. Nakamura,I. Ishibashi,T. Nakakura [DOI]
[44]. Cold Extrusion of Spur Gear with Inner Spine with Reduction in Outer Diameter or Expansion of Inner Diameter of Workpiece
Journal of the Japan Society for Technology of Plasticity 54/626 262-266 (2013) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]吉田 始 [共著者]早川 邦夫,坂井田 喜久,中村 保,磯谷 章,矢代 茂樹 [DOI]
[45]. Evaluation of environmentally friendly lubricant for aluminum cold forging using friction test based on spline extrusion
Journal of Manufacturing Processes 15/1 96-101 (2013) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]Sagisaka, Y. [共著者]Hayakawa, K.,Nakamura, T.,Ishibashi, I. [DOI]
[46]. Cold Extrusion of Spur Gear with Inner Spline
Journal of the Japan Society for Technology of Plasticity 54/624 69-73 (2013) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]吉田 始 [共著者]早川 邦夫,坂井田 喜久,沢木 洋三,中村 保,磯谷 章 [DOI]
[47]. Shaping of Internal Helical Gear by Two-Step Cold Extrusion
Journal of the Japan Society for Technology of Plasticity 54/624 64-68 (2013) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]吉田 始 [共著者]早川 邦夫,沢木 洋三,坂井田 喜久,中村 保,鈴木 正 [DOI]
[48]. Shaping of Gear by Cold Extrusion Using Double Cylindrically Layered Workpiece Consisting of Different Materials
Journal of the Japan Society for Technology of Plasticity 53/621 929-933 (2012) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]吉田 始 [共著者]早川 邦夫,沢木 洋三,坂井田 喜久,中村 保,矢代 茂樹 [DOI]
[49].
53/7 2-7 (2012) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川 邦夫 [Notes] 解説
[50].
57/4 252-254 (2012) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川 邦夫 [Notes] 解説
[51].
Journal of the Japan Society for Technology of Plasticity 53/613 140-144 (2012) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]吉田始 [共著者]坂井田喜久,沢木洋三,中村保,早川邦夫,磯谷章 [DOI]
[52].
Journal of the Japan Society for Technology of Plasticity 52/610 1181-1186 (2011) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]森広行,三井正法,中村保,田中繁一 [DOI]
[53].
Journal of the Japan Society for Technology of Plasticity 52/610 1187-1192 (2011) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川邦夫 [共著者]澤野賢太郎,今井保介,久保田義弘,難波保夫,中村保 [DOI]
[54].
Journal of the Japan Society for Technology of Plasticity 51/599 1124-1129 (2010) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川邦夫 [Notes] 解説
[DOI]
[55]. Influence of anisotropic property of plastic-deformation-dependent Young's modulus of stainless steel sheet on analytical accuracy of spring back
steel research international 81/9 1380-1383 (2010) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]Kunio Hayakawa [共著者]Kentaro Sawano,Tamotsu Nakamura,Yasuyuki Imai,Yoshihiro Kubota,Yasuo Namba,Yusuke Tabuchi
[56]. Net shape forming of thin walled cylindrical can by DC pulse resistance sintering process of titanium powder metal
steel research international 81/9 1336-1339 (2010) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]Yoshihiro Kubota [共著者]Tamotsu Nakamura,Shigekazu Tanaka,Kunio Hayakawa
[57]. Detection of tribological condition during sheet metal forming using fractal property of acoustic emission
steel research international 81/9 702-705 (2010) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]Kunio Hayakawa [共著者]Kazumi Saito,Tamotsu Nakamura,Shigekazu Tanaka
[58]. Rapid laser bending with line-shaped beam spot
STEEL RESEARCH INTERNATIONAL 81/9 962-965 (2010) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]Shigekazu Tanaka [共著者]Mohd Azri,Kunio Hayakawa,Tamotsu Nakamura,Yasushi Yamaya,Asami Morino,Hitoshi Omata
[59]. Elastic-Plastic Constitutive Equation of WC-Co Cemented Carbides for Forging Tool with Anisotropic Damage
International Journal of Damage Mechanics 19/4 421-440 (2010) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]K. Hayakawa [共著者]T. Nakamura,S. Tanaka [DOI]
[60]. Finite Element Analysis on Roller-straightening Process of Equal Leg Angles
Tetsu-to-Hagane 95/11 773-779 (2009) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] 早川邦夫 [DOI]
[61].
61/1 1-9 (2009) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川邦夫 [共著者]中村保
[62]. Experimental and Numerical Investigation on Negative Springback in Incremental Sheet Metal Forming
STEEL RESEARCH INTERNATIONAL 79/1 55-62 (2008) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]S. Tanaka [共著者]T. Nakamura,K. Hayakawa,H. Nakamura,K. Motomura
[63]. FINITE ELEMENT MODELLING OF ROLLER STRAIGHTENING OF H-SECTION BEAMS
STEEL RESEARCH INTERNATIONAL 79/1 506 - 512 (2008) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫,Kunio Hayakawa [共著者]Tamotsu Nakamura,Shigekazu Tanaka
[64]. Finite Element Analysis of V-Bending of Polypropylene Using Hydrostatic-Pressure-Dependent Plastic Constitutive Equation
MATERIALS TRANSACTIONS 48/10 2659-2664 (2007) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫,K.Hayakawa [共著者]Y.Sanomura,M.Mizuno,Y.Kasuga,T.Nakamura [Notes] 英訳転載論文
[DOI]
[65]. Net Shape Forming of Dental Prosthetic Crown by DC Pulse Resistance Sintering Process of Titanium Powder Metal
Journal of the Japan Society for Technology of Plasticity 48/557 563-567 (2007) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]久保田義弘 [共著者]中村保,田中繁一,早川邦夫,中村英雄,本村一朗,宮崎哲平 [DOI]
[66]. Finite Element Analysis of V-Bending of Polypropylene Using Hydrostatic-Pressure Dependent Plastic Constitutive Equation
Key Engineering Materials 340-341/ 1103-1108 (2007) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]Kunio Hayakawa [共著者]Yukio Sanomura,Mamoru Mizuno,Yukio Kasuga,Tamotsu Nakamura [DOI]
[67].
48/552 56-60 (2007) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]鷺坂芳弘 [共著者]中村保,田中繁一,早川邦夫 [DOI]
[68]. Fratal property of Acoustic Emission of cold forward extrusion die in practical manufacturing-scale experiment using bolt part former
47/546 606-610 (2006) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]齊藤和美,中村保,田中繁一,野末卓哉 [DOI]
[69].
18/4 300-305 (2006) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] 佐野村幸夫, 早川邦夫, 水野衛, 春日幸生, 川森重弘 [DOI]
[70]. Tribo-Characteristics of Stainless Steel Sheets in Iterative Processes of Sheet Metal Forming
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220/1 65-71 (2006) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] T Nakamura, S Tanaka, K Hayakawa, M Sugisawa, K-I Aoyama, J-I Shibata [DOI]
[71].
18/4 293-299 (2006) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]佐野村幸夫 [共著者]早川邦夫,水野衛 [DOI]
[72].
46/531 332-336 (2005) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川邦夫 [共著者]佐野村幸夫,水野衛,春日幸生,中村保
[73]. Bonding Characteristics of Various Metals by DC Pulse Resistance Heat Pressure Welding
MATERIALS TRANSACTIONS 46/2 292-297 (2005) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] T. Nakamura, K.Hayakawa, S. Tanaka, H. Imaizumi, Y. Nakagawa [Notes] 英訳転載論文
[DOI]
[74].
39/3 39-44 (2005) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]佐野村幸夫 [共著者]早川邦夫,水野衛,春日幸生,川森重弘
[75]. Analysis on Fatigue Crack Initiation and Propagation of Cold Forging Tools by Local Approach to Fracture
Material Transaction 45/2 461-468 (2004) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]K. Hayakawa [共著者]T. Nakamura,S. Tanaka [Notes] 英訳転載論文
[DOI]
[76]. Modification of Isotropic Hardening Model and Application of Kinematic Model to Constitutive Equation for Plastic Behavior of Hydrostatic Pressure Dependent Polymers
Journal of The Society of Materials Science, Japan 53/2 143-149 (2004) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] 佐野村幸夫, 早川邦夫 [DOI]
[77]. Finite Element Analysis of Behavior of Hard Film-Forging Tool Material Interface by Interfacial Damage Mechanics
Journal of JSTP 45/517 113-117 (2004) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川邦夫 [共著者]中村保,原田邦明,田中繁一
[78]. Analysis of Interfacial Damage and Debonding Life Estimation of Cold Forging Tool Coated by Hard Film
MATERIALS TRANSACTIONS 45/9 2832-2837 (2004) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]K. Hayakawa [共著者]T. Nakamura,S. Tanaka,K. Harada [DOI]
[79]. The Study of Bonding and Complex Material Concerning with Practical Accident -2nd Report-
Journal of JSTP 44/512 922-927 (2003) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]白井秀明 [共著者]吉田一也,佐野村幸夫,早川邦夫,桜井冨美夫
[80]. Annual Review- Plastic Materials-
Journal of JSTP 44/511 775-792 (2003) [Refereed] non-refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]長谷部忠司 [共著者]後藤學,早川邦夫,沢田孚夫
[81]. Bonding Characteristics of Various Metals by DC Pulse Resistance Pressure Welding
Journal of JSTP 44/512 931-936 (2003) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]中村保 [共著者]田中繁一,早川邦夫,今泉晴樹,中川雄太
[82]. Detection of Damage and Fracture of Forging Tools by Fractal Property of Acoustic Emission
Journal of JSTP 44/505 72-76 (2003) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川邦夫 [共著者]中村保,米澤英樹,田中繁一
[83]. Tribo-Testing Method for Estimating Tribo-Characteristics at Piercing Punch in Backward Can Extrusion
Lubrication Engineering 59/4 12-17 (2003) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]T. Nakamura [共著者]S. Tanaka,K. Hayakawa,I. Takahashi
[84]. Elastic-Plastic-Damage Constitutive Equations for Cold Tool Steel Taking into Account Unilateral Behavior under Tension and Compression
Journal of JSTP 43/496 417-421 (2002) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]中村保,田中繁一
[85]. Analysis of Fatigue Crack Initiation and Propagation in Cold Forging Tools by Local Approach to Fracture
Journal of JSTP 43/497 546-550 (2002) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川邦夫 [共著者]中村保,田中繁一 [Notes] 論文賞受賞
[86]. Lubrication Behavior of Solid Lubricants in Forming Processes by FEM Simulations
Handbook of Tribology and Lubrication 10/ 34-37 (2002) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]T. Nakamura [共著者]S. Tanaka,K.Hayakawa,H. Imaizumi,Y. Sakakibara,K. Harada
[87].
67/660 2692-2699 (2001) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]中村保 [共著者]田中繁一,早川邦夫,今泉晴樹,西村昌樹,村越靖久 [DOI]
[88]. A Study of the Lubrication Behavior of Solid Lubricants in the Upsetting Process
Journal of Tribology, Transaction of ASME 122/4 803-808 (2000) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]Nakamura, T. [共著者]Tanaka, S. ,Hayakawa, K. ,Fukai, Y. [DOI]
[89]. Damage Evolution and Damage Surface of Elastic-Plastic-Damage Materials under Multiaxial Loading
International Journal of Damage Mechanics 7/2 103-128 (1998) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]Hayakawa, K. ,Murakami, S. [共著者]Liu, Y. [DOI]
[90]. An Irreverible Thermodynamics theory for Elastic-Plastic-Damage Materials
European Journal of Mechanics, A/Solids 17/1 13-32 (1998) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]K. Hayakawa [共著者]S. Murakami [DOI]
[91]. Thermodynamical Modeling Elastic-Plastic Damage and Experimental Validation of Damage Potential
International Journal of Damage Mechanics 6/4 333-363 (1997) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]K. Hayakawa [共著者]S. Murakami [DOI]
[92]. Constitutive and Evolution Equations on Elastic-Brittle Materials Based on Irreversible Thermodynamics
International Journal of Mechanical Sciences 39/4 473-486 (1997) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] Hayakawa, K. ,Murakami, S. [DOI]
[93].
45/8 893-900 (1996) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]神谷（早川） 邦夫 [共著者]村上 澄男 [Notes] 論文賞受賞
[DOI]
[94].
45/6 667-674 (1996) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]村上 澄男 [DOI]
[95].
45/2 176-182 (1996) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]村上 澄男 [DOI]
[96]. Application of Double Cantilever Beam Model to the Analysis of Creep Crack Growth Under Neutron Irradiation
European Journal of Mechanics, A/Solids 12/2 249-263 (1993) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]Murakami, S. [共著者]Hayakawa, K. ,Mizuno, M.
[97]. Mesh Dependence and Stress Singularity in Local Approach to Creep-Crack Growth Analysis
59/564 1811-1818 (1993) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] co-author
[Author] [責任著者]劉 彦 [共著者]早川 邦夫,村上 澄男,早川 邦夫 [DOI]
[98].
59/564 1917-1924 (1993) [Refereed] refereed [Internationally co-authored papers] non-internationally co-authored paper
[Lead author or co-author] author
[Author] [責任著者]早川 邦夫 [共著者]村上 澄男 [DOI] |